Description

Recommended for the Wintec Pro Stock. The traditional 1¼ inch design with a sleeve lets you buckle down near the iron, so there is no buckle sitting under your thigh on a five hour day.

Please note: these require a stirrup iron with a 1¼ inch eye.

How to fit them

Start with the sleeve. Unfold the straps and keep the sleeve separate. With both logos facing you, thread the pointed end through the sleeve, then push the sleeve up to just underneath the buckle.

Add your iron. Thread the pointed end through the eye of your iron with the logo facing down. Keep pulling it through, up through the sleeve and behind the buckle. Buckle at your preferred length, then pull the pointed end back down through the sleeve. Both logos should be visible again.

Get the buckle into position. Hold the straps loosely behind the buckle, as though your hand is a temporary stirrup bar, and pull the buckle down towards the iron. The sleeve should sit snug against the iron with the buckle just above it. Either put the excess through the eye once more, or fold it under the top of the iron and tuck the remaining length back up through the sleeve.